Uninterrupted power supplies (UPS) have their own dashboards with unique information.
This is what’s available on a UPS dashboard:
Several tabs are also available for accessing more detail.
See What happens if my collector disconnects?
Device details
Provides you with inventory details about the UPS:
- IP address(es)
- Network(s) it belongs to
- Device type
- Make and model
- Software version
- Serial number
- Description
To update a device’s details, such as its name, type, or management status, see How do I edit device details? You can also update device details from Discovery > Manage Devices.
KPIs (key performance indicators)
Located next to the device details.
- Status indicates the last known discovered status (on or off wall power).
- Battery Condition indicates whether the device’s charge is Good or Needs Replacing.
- Open Alerts indicates the numbers of open alerts for the UPS, organized by severity (emergency, critical, warning, informational) and paused state. To see all alerts by severity or paused state, click the arrow next to the counts.
- Percentage Charged indicates how much charge remains in the UPS battery. If the device is off wall power for an extended time, you’ll see this percentage drop.
- Time to Charge estimates how long it will take for the device to fully recharge.
- Discharge Time estimates how much time is left before the battery is completely drained.
- Credential status indicates the current status for device credentials, including SNMP, login, WMI, and VMware credentials.
Icon
Status description
The device isn’t running the services for the credential type.
Auvik won’t try credentials on the device based on its type (e.g., printer).
Auvik has the correct credentials for the device.
Auvik needs credentials for the device.
Auvik is trying credentials for the device.
Outage monitor
Displays a graph of when the UPS was on wall power and when it experienced a power outage. Below the graph is the KPI for the current status of the power supply. To view more detail about any data point on the graph, run your cursor over the graph line. A tooltip pops up to show you the date and time of the data point, and the power status at that time.
See also How can I see more detail on charts?
Voltage
Displays a graph of the power supply’s input and output voltage for the selected date range. Below the graph is the KPI for the current state of the UPS voltage. To view more detail about any data point on the graph, run your cursor over the graph line. A tooltip pops up to show you the date and time of the data point, and the input and output voltage at that time.
See also How can I see more detail on charts?
More details
A UPS dashboard has a number of tabs and menus that can be clicked for more detail. In each section, you can filter the list to show only certain details. For more information on filtering, see How to filter data in Auvik.
- Networks provides a list of all networks associated with the UPS. To see the dashboard for a specific network, click on the row for a network.
- Interfaces provides a list of all interfaces associated with the UPS. To see the dashboard for a specific interface, click on the interfaces row.
- Services provides a list of all discovered services running on the UPS. To see all other devices running the same service, click on the row for a service.
- Alerts provides a list of all alerts that have been triggered for the UPS.
- Notes provides a list of all notes that have been added for the UPS. To view note details, click the row for a specific note.
- Debug provides you with tools to help troubleshoot issues with the UPS.
- OID Monitors provides a list of OIDs that have been mapped to the UPS along with their current values.