The alert types below were previously available only through legacy alerting. They are now available in Alerts v2. For instructions on creating an alert, see Creating Alerts using Alerts v2.
Collector and device alerts
- Auvik Collector Disconnected
- Auvik Collector Discovery
- New Network Device Discovered
- Network Element Offline
- Infrastructure Device Offline
- Network Element Uptime
- Firmware Change on Network Element
- Software Version Change on Network Element
Network performance and routing alerts
- High Broadcast Traffic
- High CPU Utilization
- High Memory Utilization
- High Storage Utilization
- High Interface Utilization
- High Packet Discard(s)
- High Packet Error(s)
- BGP Peer is Down
- OSPF Neighbor is Down
Hardware and high availability alerts
- VMware Hypervisor CPU Module is Bad or Degraded
- VMware Hypervisor Hard Drive is Bad or Degraded
- VMware Hypervisor Power Supply is Bad or Degraded
- VMware Hypervisor RAM Module is Bad or Degraded
- A Fan Status for a network device has changed
- A PSU Status for a network device has changed
- HA Failover Detected
- HA Synchronization has Failed
- Stack Switch Port Status Change
- Stack Switch Member Status Change
VPN alerts
- All VPN tunnels are down
- VPN Remote Gateway is lost
- Number of SSL VPN Sessions Has Reached The Maximum
- Low Number of Available SSL VPN Sessions
- High Number of SSL VPN Sessions In Use
- High Percentage of SSL VPN Sessions In Use
UPS alerts
- UPS - Possible Power Outage
- UPS - Low Battery Charge
- UPS - Battery Needs To Be Replaced
Printer alerts
- Printer - Out of Paper
- Printer - Low Ink Level
- Printer - Out of Ink
- Printer - Low Paper
- Printer - Output Tray Missing
- Printer - Input Tray Missing
- Printer - Paper Jammed
- Printer Offline
VMware snapshot alerts
- Recent VMware Snapshot Not Taken
- VMware Snapshot Limit Exceeded
- VMware Snapshot Repository Size Exceeded
Configuration alerts
- Configuration Backup
- Configuration Polling