How to set component statuses for fan and power supplies

Auvik can now monitor the components. This functionality will allow teams to proactively monitor the health of critical hardware components, such as power supplies and fans.

Is component monitoring available on ALL of my devices?

Auvik has been working diligently to add support for many devices. Auvik is continually adding devices. If the data is available via SNMP and it is a common network device, please provide the evidence to your representative.

To best understand if a device is supported navigate to its page and check to see if the fan and power supply health widgets are displayed.

Create an alert based on fan and power supply component statuses

Fan and Power supply component status alerting are the first alerts to be available exclusively in the new alerting platform.

1. Click on Manage Alerts 
2. Click on Create New Alert
3. Set your desired entries for:
   • Alert Name
   • Alert Description
   • Apply alerts to the following organizations
4. Set Apply Conditions to Devices
5. Set Which Devices to either:
   • Devices with a specific tag
   • Devices that match specific conditions
6. Set your desired Alert Severity
7. Under Define Alert Rule, within Trigger Conditions, select All conditions must be true (AND)
8. Set the drop down to either:.
   • Fan Component Status
   • Power Supply Component Status
9. Set Not Equal To
10. Set component status to Good 
11. Set Trigger condition 
12. Set Alert Delay as either
    • Time Delay
    • Percentage of Occurrences
    • No Delay
13. Set desired Notifications
14. Set desired Define Global Clear Condition
15. Click Complete and Save